Product ID:XYRON 224
MSDS Date:11/12/1991
FSC:3439
NIIN:00-056-3612
MSDS Number: BSPZZ

EUTECTIC CORP

40-40 172ND ST
FLUSHING, NY 11358-2799
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

NICKEL (SOLUBLE) (SUSPECTED HUMAN CARCINOGEN BY NTP, IARC,

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: >50%

OSHA PEL 1 MG/CUM

ACGIH TLV: 0.05 MG/CUM IC

POTASSIUM SILICATE, POTASSIUM METASILICATE *93-1*

CAS: 1312-76-1

BARIUM CARBONATE

CAS: 513-77-9

RTECS: CQ8600000

Fraction By Weight: 1-5%

OSHA PEL 0.5 MG/CUM (BA)

ACGIH TLV: 0.5 MG/CUM (BA)

FLUORSPAR *93-1*

CAS: 14542-23-5

OSHA PEL 2.5 MG/CUM AS F

ACGIH TLV: 2.5 MG/GUM AS F

GRAPHITE

CAS: 7782-42-5

RTECS: MD9659600

OSHA PEL 2.5 MG/CUM

ACGIH TLV: 2 MG/CUM RESP IC

COPPER (DUST & MIST), BRONZE POWDER

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 1-5%

OSHA PEL 0.1 MG(CU)/M3 (FUME)

ACGIH TLV: 0.2 MG/M3 (FUME)

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

SILICATE BINDERS (SODIUM SILICATE) *93-3*

CAS: 1344-09-8

ACGIH TLV: 10 MG/CUM

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:LITTLE/NO HAZARDS EXIST FOR ARC
WELDING ELECTRODES/BRAZING RODS BEFORE THEY ARE USED IN THE WELDING
PROCESS. INHALATION OF FUMES: LUNG/ORGAN DAMAGE. EYE/SKIN:
ULTRAVIOLET LIGHT INJURES EYE; FLUXES/CHE MICAL AIDS CAUSE
IRRITATION/CHEMICAL BURNS. INGESTION: HARMFUL/FATAL. NUISANCE DUST:
PULMONARY IRRITATION/FIBROSIS.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:SKIN: ARC RAY/ULTRAVIOLET LIGHT CAUSES BURNS.
INHALATION: SYMPTOMS OF METAL FUME FEVER OCCUR W/IN SEVERAL HOURS &
LAST 6-24 HOURS W/CHILLS/FEVER/HEAD & MUSCLE ACHE/TIGHT CHEST/NOSE
& MOUTH DRYNESS/MUS CULAR PAIN/NAUSEA/VOMITING. SKIN: NUISANCE DUST
MAY CAUSE POSSIBLE DRYING. ELECTRICAL SHOCK CAN KILL.
Medical Cond Aggravated by Exposure:RESPIRATORY OR ALLERGIC CONDITIONS

First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: THOROUGHLY WASH HANDS
OR AFFECTED AREAS W/SOAP & WATER TO REMOVE ALL RESIDUE. EYES:
THOROUGHLY FLUSH W/WATER FOR AT LEAST 15 MINS TO REMOVE ALL
RESIDUES. INGESTI ON: OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point:NON-FLAMMABLE
Extinguishing Media:CO2, DRY CHEMICAL FOAM TYPE
Fire Fighting Procedures:USE AN APPROVED SELF-CONTAINED BREATHING
APPARATUS.
Unusual Fire/Explosion Hazard:WELDING ARC/SPARKS/FLAMES CAN IGNITE
COMBUSTIBLES/FLAMMABLES. METAL POWDER DUST MAY PRESENT
FIRE/EXPLOSION HAZARD. CANS UNDER PRESSURE/FLAMMABLE MAY EXPLODE.

Handling and Storage Precautions:KEEP WELDER'S HEAD OUT OF FUMES. READ
THE CONTAINER LABEL. TO DETERMINE COMPOSITION/QUANTITY OF FUMES
TAKE AIR SAMPLE INSIDE WELDER'S HELMET.
Other Precautions:WHEN PREPARING WORKPIECE W/FLAMMABLE CHEMICAL AID,
KEEP ALL WELDING SOURCES/SPARKS/FLAMES AT LEAST 20 FEET FROM THE
WORKPIECE UNTIL THE FLAMMABLE EVAPORATES. HANDLE W/CARE. TRAIN
WORKERS NOT TO TOUCH LIVE ELECTRICAL PARTS/WEAR INSULATION.

Respiratory Protection:IF THE WORK STATION ISN'T PROPERLY VENTILATED,
USE A NIOSH APPROVED RESPIRATOR.
Ventilation:GENERAL/LOCAL EXHAUST: TO KEEP ALL FUMES & DUST FROM
WORKER'S BREATHING ZONE. TRAIN WELDER TO KEEP HEAD OUT OF FUMES.
Protective Gloves:WELDER'S
Eye Protection:FACE SHIELD W/FILTER LENS (SEE SUPP)
Other Protective Equipment:HELMET/PROTECTIVE SCREENS/FLASH GOGGLES/ARM
PROTECTORS/APRON/HAT/DARK PROTECTIVE CLOTHING. START W/DARKER
SHADE.
Supplemental Safety and Health
MOST WELDING DOESN'T PRODUCE EXPOSURE IN HELMET >5 MG/CUM.
COMPOSITION/QUANTITY DEPENDS ON METAL BEING
WELDED/PROCESS/PROCEDURES/ELECTRODES/OTHER CONSUMABLES
USED/COATINGS ON WORKPIECE/NUMBER OF WORKE R/VOLUME OF WORK
AREA/QUALITY OF VENTILATION/POSITION OF WELDER'S HEAD/PRESENCE OF
CONTAMINANTS.

Stability Indicator/Materials to Avoid:YES
METAL POWDERS SUCH AS ALUMINUM, COMBUSTIBLES & FLAMMABLES
Stability Condition to Avoid:IGNITION SOURCES, FAVORABLE CONDITIONS OF
PARTICLE SIZE, DISPERSION
Hazardous Decomposition Products:HYDROGEN CHLORIDE/PHOSGENE/CHLORINE
GAS/METAL OXIDE/FLUORIDE COMPOUND/OXIDES OF
CARBON/SILICA/NITROGEN/OZONE/INERT GASES

Waste Disposal Methods:DISPOSE OF WASTE MATERIAL, POWDERS, GRINDING, OR
FILTER RESIDUES IN AN ENVIRONMENTALLY SENSITIVE MANNER IN
ACCORDANCE W/LOCAL, STATE, & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.